📌 Purpose
- This article explains how to record lectures and events with the installed cameras and microphones, using the Epiphan system.
👥 Audience
🖥️ Applies To
🛠️ Instructions
To access the Epiphan recorders for the Young Ballroom, Boardroom, and Library from your computer, first make sure you are using a wired ethernet connection, or switch your wifi to the SALVE-AV network. (SALVE-AV does not have a password).
On the computer, open Chrome and type the appropriate IP address of the device.
Boardroom: 10.46.0.4
Ballroom: 10.46.0.5
Library: 10.46.0.6
The username and password is the same for all of them.
username: admin
Password: 1947
After signing in, click on “Auto” or "Channel 1" in the upper left under the Channel section.
Click on the “Recording” option that comes up below.
When you are ready to record, click the “Start” button. You will see that it tells you once it begins recording, and for how long.
Click “Stop” when you want the recording to end.
After a few seconds, click on the refresh button in the upper left corner of the browser.
You will see your new recording under the “Recorded Files” section next to the date. Depending on how long the recording is, it may take a few minutes for the new recording to appear under recorded files.
Clicking on the file names will download the files to the computer.
Go to your download folder, and retrieve the recording. You can then upload it to Vimeo or another storage space.
💡 Troubleshooting & Tips
Things to consider
Select which camera you want to use and the shot you want to compose before you begin recording. This is done from the “Camera Controls” page on the Crestron panels. You may not be able to change it once the recording has begun.
It is recommended that lecturers wear lavalier microphones, as mic volume will be affected if they move away from the podium mic.