📌 Purpose
- Provides an operational guide for the learning technology in O'Hare 263.
👥 Audience
🖥️ Applies To
🛠️ Instructions
To begin, press anywhere on the touch panel splash page.
Press which source you would like to display on the projector.
Room PC refers to the computer inside the teacher's station podium. Make sure the labelled power button is on.
Plug your laptop into the provided HDMI cable to use the laptop selection.
AIR MEDIA works with your laptop in two ways. Plug the Air Media adapter into a USB-C port on your device. Select "Air Media" on the touch panel and your device will display after a few seconds.
You can also type the IP address in the lower left of the Air Media home screen into the address bar of a browser, and access Air Media connectivity without the adapter. Follow the prompts once the IP brings you to the home page.
The "clear" button will remove all sources from the projection.
If you select the "settings" icon in the upper right, it will bring you to projector on/off and screen up/down commands. There is also a screen control on the wall to the left of the teacher's station.
The "power" icon in the upper right leads you to the system shut down page.
Please shut the system down when you are done using the room!
💡 Troubleshooting & Tips
- Contact the Technology Services Center help desk for assistance: (401) 341-7777. support@salve.edu